As he stated later on, his cable worked with a MaxTrac and a GM300. Both of these are mobiles, so I think it's safe to assume that his GTX is a mobile as well as they all use the same RJ45 programming cable.
Bob M. ====== --- Danny Musten <[EMAIL PROTECTED]> wrote: > Mobile or Portable? The portable needs to be > powered, if so. > More than likely it has been programmed with a newer > RSS as Mike said. > Danny KD4RAA > > On 1/24/07, Mike Perryman > <[EMAIL PROTECTED]> wrote: > > > Sounds like someone may have used a newer version > of RSS than yours.... they are not backward > compatible... That is the only guess I would > have... > > > > > > 73 > > Mike Perryman > > www.k5jmp.us > > > > -----Original Message----- > > From: [email protected] > [mailto:[EMAIL PROTECTED] Behalf > Of Andrew G. > > Sent: Wednesday, January 24, 2007 2:48 PM > > To: [email protected] > > Subject: [Repeater-Builder] Motorola GTX900 > Programming Issue > > > > > > I have a Motorola GTX900 that is refusing to > program. It does not want to communicate with > either of my 2 PC's in DOS mode. So far have tried > RSS 1, 2, and Lab R01. Nothing, keep getting > Error#2 no communication. Cable/PC is working > since I pulled the GTX off and read/wrote my Maxtrac > and GM300 with no problem. Any Ideas? > > > > Thanks > > Andy KC2GOW ____________________________________________________________________________________ Get your own web address. Have a HUGE year through Yahoo! Small Business. http://smallbusiness.yahoo.com/domains/?p=BESTDEAL
