Hello, I did those Mods before there was a Repeater Builder website, like I said in the other email they are great little radios and make great inexpensive low power repeaters, if you call 15 to 20 watts low power!
Paul -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of twoway_tech Sent: Tuesday, February 20, 2007 9:13 AM To: [email protected] Subject: [Repeater-Builder] Re: Johnson PPL 6060 manual needed Well, keep me posted on your findings with these things... I have a few laying around that I already have Xtals for and want to get going. I'll let you know if I find anything new. -Jordan --- In [email protected], "ka3hsw" <[EMAIL PROTECTED]> wrote: > > --- In [email protected], "twoway_tech" <jcarter@> > wrote: > > > > Well, Speaking of EFJ PPLs, has anyone accually performed the > > repeater mods that are descibed on the repeater builder page? I > > have done one radio, but I am getting RF into the receiver. Jim > > Sharp (the author) mentions putting a shield around Q1, but the > > transistors are not labeled that way. I don't really see any EASY > > way to install any shield that would do much good due to the trace layout on the board. > > [snip] > > Haven't done one yet, but have been studying the docs and, according > to the block diagram and schematic, the first RF amp is actually Q201. > There is a picture of where to solder the shield in the "updated-ppl- > board.doc" file, linked from the conversion page. It goes on the foil > side of the board, almost dead-center side-to-side, about 1/4 of the > way forward from the rear edge. > > George, KA3HSW / WQGJ413 > Yahoo! Groups Links -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.441 / Virus Database: 268.18.3/693 - Release Date: 2/19/2007 5:01 PM -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.441 / Virus Database: 268.18.3/693 - Release Date: 2/19/2007 5:01 PM <p class="style1">Visit <a href="http://www.ourphonelist.com";>OurPhonelist.com<br>It's free and you'll never lose track of a phone number again! </a></p> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
