At 11:57 AM 03/20/07, you wrote: >You might want to try pin 14 instead of pin 8. > >I just got done interfacing a controller to a GM300 and couldn't get pin 8 >to work but pin 14 did. > >The RSS indicates both pin 8 and 14 are PL/DPL/CSQ detect but only pin 14 >seems to function properly. > >Randy
RSS will let you assign a function (like RSS) to multiple pins, but the radio won't work properly if you do that (the programmer that created that RSS forgot to check for that). Before you upload a new codeplug to a radio you need to review the programming and make sure that you haven't multiply assigned a function. And note that some pins pull down, and some pull up. Pin 4 pulls up, pin 8 and 14 both pull down. Some are output only, some are input only, and some are bidirectional. See this article "The Definitive Guide to the 16 pin MaxTrac and Radius Option Connector " at <http://www.repeater-builder.com/maxtrac/maxtrac-option-plug.html> Mike
