I ran into something similar on an R100. I tried to use 5 khz steps in binary coding, and found that the synthesizer only responded to every third step. Maybe this is happening. I programmed 146.22 in the rec and 146.82 in the tx and they locked right up. Like you say, moving 5khz and ool sure sounds like a numeric problem. You may need to tweak the VCO as well. Wonder if both TX and RX are out of lock, and if you try and read back if it programmed correctly? Also there is a Restore Defaults tab in the software that may be useful if the sys mod has become corrupted. Had a UHF repeater that would not make channel guard tone, and had to reinit the sys mod to bring it back - much better than a $k + module. Seems like TQS3353 R16A is already out of date.
Best luck, Steve NU5D Doug Bade wrote: > I just checked this am.. Mine do not have a dipswitch in the rx > synthesizer... Actually they are 150.8 to 174 and that is > it!!!!!!!!!! and at 150.800 they lock and at 150.795 they unlock (RX) > .. The sw allows programming this but no lock.. I need to look into > that... Not vco tuning this is a mathematical crash.. Version 14 of > the MIIe/MIII software..... > > Doug > > > At 01:31 PM 6/19/2007, you wrote: > > > > -- Ham Radio Spoken Here !!! NU5D EM11 http://www.qrz.com/callsign/NU5D Nickel Under 5 Dollars
begin:vcard fn:Steve Bosshard n:Bosshard;Steve org:Bosshard Radio Service adr:;;503 B. South 25th. Street;Temple;Texas;76504;USA email;internet:[EMAIL PROTECTED] tel;work:254-773-1102 tel;fax:254-773-1174 tel;home:254-770-0111 tel;cell:254-624-4230 url:http://www.bosshardradio.com version:2.1 end:vcard
