There is no such thing as a Quantar "wildcard" as a discrete board the way there is a wildcard board for Micor, MSR2000, and MSF5000 stations.
The Quantar "wildcard" functions are software defined in the station's programming. Inputs and outputs [hardware I/O] can be part of what you create in the wildcard programming. These inputs and outputs are supported by hardware on the station's wireline interface board. There are two types of wireline boards, 4- wire and 8-wire. The 4-wire board supports the "basic" wildcard mode and the 8-wire board supports the "enhanced" mode. There are also different board revisions. Early boards have EPROM based firmware. Newer boards have flash memory and support firmware download. Ideally, if you are retrofitting a wireline board into an existing station, the firmware versions should align. Bro-Comm has some Quantar wireline boards listed on ebay. -------------------------------------------------------------------- --- In Repeater-Builder@yahoogroups.com, Paul Metzger <[EMAIL PROTECTED]> wrote: Hello all, Might any of you be willing to part with a Quantar *WILDCARD* board? I am in need of one for a ham project. Paul Metzger K6EH > Digital Voice Amateur Radio Association > http://www.hamradio-dv.org > N6DVA >