Which connector is used? Do you have a list of pin functions?
Thanx! Brian --- In [email protected], "nj902" <[EMAIL PROTECTED]> wrote: > > There is no such thing as a Quantar "wildcard" as a discrete board > the way there is a wildcard board for Micor, MSR2000, and MSF5000 > stations. > > The Quantar "wildcard" functions are software defined in the > station's programming. Inputs and outputs [hardware I/O] can be > part of what you create in the wildcard programming. > > These inputs and outputs are supported by hardware on the station's > wireline interface board. There are two types of wireline boards, 4- > wire and 8-wire. The 4-wire board supports the "basic" wildcard > mode and the 8-wire board supports the "enhanced" mode. > > There are also different board revisions. Early boards have EPROM > based firmware. Newer boards have flash memory and support firmware > download. Ideally, if you are retrofitting a wireline board into an > existing station, the firmware versions should align. > > Bro-Comm has some Quantar wireline boards listed on ebay. > > ------------------------------------------------------------------- - > > > --- In [email protected], Paul Metzger > <paulmetzger@> wrote: > > Hello all, > > Might any of you be willing to part with a Quantar *WILDCARD* board? > I am in need of one for a ham project. > > Paul Metzger > K6EH > > > Digital Voice Amateur Radio Association > > http://www.hamradio-dv.org > > N6DVA > > >
