Now I've got to look for a copy of it... Please Email me direct so I have your proper email address to send the scans to..
s. > Jay Urish <[EMAIL PROTECTED]> wrote: > > I was back down at the site today and yup... Flaaaaayyyykey... > > My PL board is definitely going haywire. > > I have a ts64 ready to go.. > Can you shoot over your notes? > > skipp025 wrote: > > > > > > Flaky on the TX or RX side? Tone reeds do fail and get flaky. > > > > In many cases you can actually swap the reeds to the other > > location (regardless of what the labels might say). If the > > problem moves to "the other side" function... you know the > > reed needs to be replaced. > > > > I've replaced lots of tone reeds & rc networks, never an > > entire card. > > > > I've also replaced the card with a Comm Spec TP-3200 and I have > > the information you're asking about. But I've also revised that > > modification quite a bit since the initial write-up. Maybe get > > you a copy of it on Tuesday if you really want it... still. > > > > cheers, > > skipp > > > > > Jay Urish <jay@> wrote: > > > > > > Does anybody have and notes or down n' dirty drawings on best practice > > > for integrating a ts-64 to the msr2000? I think my PL card is flaky, > > and > > > I have a space ts64... > > > > > > > > > > > > -- > > > Jay Urish W5GM > > > ARRL Life Member Denton County ARRL VEC > > > N5ERS VP/Trustee > > > > > > Monitoring 444.850 PL-88.5 > > > > > > > > > -- > Jay Urish W5GM > ARRL Life Member Denton County ARRL VEC > N5ERS VP/Trustee > > Monitoring 444.850 PL-88.5 >
