John,
Thanks for the reply
One thing I do have is the manual although not all DTMF programming commands
work with my panel still suspect it's a hardware issue
Will speak to Zetron tomorrow see what they come up with !
Regards
Al
Maire-Radios <[EMAIL PROTECTED]> wrote:
what you are talking about the ID in DTMF and the time factor are all in
programming. I don't have a book on the unit here but it all can be done.
John
----- Original Message -----
From: radiotech808
To: [email protected]
Sent: Wednesday, October 24, 2007 4:18 PM
Subject: [Repeater-Builder] Zetron 38 Panel
Hi All,
I am trying to get the Zetron 38 running on our local 2 meter
repeater (only as a temp measure) due to logic problems
What I want....
Morse ident out every 15mins as to comply with the regs, the ident
does go out but no radio tx any thoughts
Station ID
At the moment the station id is DTMF I want to chnage this to morse
once again any thoughts or ideas
Ps The 38 I have is fairly old hardware (ver 1.5) so what I am
looking for might not work ?
Regards
Al
