do you have one of the follow and the book for the other as there are: 38 38A 38max and there may be 2 ver of the plan 38.
John ----- Original Message ----- From: ALASTAIR GRAHAM To: [email protected] Sent: Wednesday, October 24, 2007 7:18 PM Subject: Re: [Repeater-Builder] Zetron 38 Panel John, Thanks for the reply One thing I do have is the manual although not all DTMF programming commands work with my panel still suspect it's a hardware issue Will speak to Zetron tomorrow see what they come up with ! Regards Al Maire-Radios <[EMAIL PROTECTED]> wrote: what you are talking about the ID in DTMF and the time factor are all in programming. I don't have a book on the unit here but it all can be done. John ----- Original Message ----- From: radiotech808 To: [email protected] Sent: Wednesday, October 24, 2007 4:18 PM Subject: [Repeater-Builder] Zetron 38 Panel Hi All, I am trying to get the Zetron 38 running on our local 2 meter repeater (only as a temp measure) due to logic problems What I want.... Morse ident out every 15mins as to comply with the regs, the ident does go out but no radio tx any thoughts Station ID At the moment the station id is DTMF I want to chnage this to morse once again any thoughts or ideas Ps The 38 I have is fairly old hardware (ver 1.5) so what I am looking for might not work ? Regards Al
