Hi Ron, Nope... I refer to the MSR-2000. I probably have more experience with the MSR-2000 that most anyone you can find except the original Engineers.
The answers to your receiver questions are as follows. They might have spec'd two ranges for the American MSR Receiver boards but I have seen and own them in more than two vhf-high ranges. There are MSR-2000's made of operation out of the US in some pretty wild bands (based on what we find in operation around the US). I've serviced MSR Repeaters in very large Cruise Ships from foreign ports with some crazy frequencies in operation. The 70 MHz band comes to mind as one such bizzare' MSR I've seen. The Manual for that Mid band VHF Repeater spec'd it for operation from 66 to 88 MHz... go figure. I have three different band segment receiver boards for the VHF 138-174 band but the really high split 170 range receiver is thankfully not found very often. The Helical and injection chain mods for the MSR-2000 is a lot of careful work. Anything is possible... just a question of how practical in time, effort and materials required. Another way to go regarding an MSR-2000 to 224 MHz conversion is to use a receiving converter. My last Micor Grind the Helicals was to place an 800 MHz on 906 MHz. Worked just find but the conversion was a lot of effort. Now we find the radios already built on the desired band of operation. cheers, skipp > Ron Wright <[EMAIL PROTECTED]> wrote: > Skipp, > > Sounds as if you are talking more of the Micor line rather than the Mitrek. MSR2000 is based on Mitrek. The Mitrek was spec'd from 136-146 and 146-174, two ranges. I wanted to know if the MSR2000 did the same. > > Looks as if you get either it will work in 144-148, hi. > > The low band version also did the same with Mitrek, 2 bands rather than 3. Had console on 138 that would go to 6 meters. > > I have done the helical mod on the Micors with replacing the screw tuning rods and worked well...well tuned, but not sure of what the helical is really doing. > > 73, ron, n9ee/r > > > > >From: skipp025 <[EMAIL PROTECTED]> > >Date: 2007/11/07 Wed AM 11:02:16 CST > >To: [email protected] > >Subject: [Repeater-Builder] Re: MSR2000 info VHF Range Versions > > > > >Along a generic theme... you can assume there are three VHF Band > >segements for operation in the 138-174 range. The low split receiver > >is good from 138 to about 152/155 MHz (working from memory). The > >second range is about the 149 to 161 MHz range although not stated > >as this value in the manual. The third is the high range receiver > >from about 160 to 174 MHz. > > > >Both the mid and low range receivers should tune into the 2-Meter > >Amateur Bands no problama. I'm running a number of mid range boards > >at 145.310 with great results. > > > >Most of the issue with the receiver board is the front-end > >pre-selector assembly follow by the oscillator (channel element) > >injection chain range (per receiver range model/version) > > > >Only the high range 160-174 range receiver is not a practical > >animal for Amateur 2-Meter Band operation. However, it can be > >converted up to the 224 Amateur Band if you have the time and > >tools to "do it right". > > > >The transmitter board is pretty broad banded and relative to > >the 138-174 band one board should operate through the entire > >range. > > > >There are versions of both the receiver and transmitter board > >specified for duplex and standard simplex operation. The duplex and > >high rf version boards have additional connector filtering at the > >edge pins/plug. > > > >I have tried and use both the duplex and base station (simplex) > >boards in repeater applications without a problem. > > > >Like everything... (as seen on ebay and the flea markets) the price > >of surplus MSR-2000 repeater and base station units are starting to > >drop to a very practical value. You need only ensure you have a > >duplex version with a working RF PA and a receiver you can range > >into your desired band to rock and roll. All the rest is standard > >Motorhead (Motorola) Repeater 101. > > > >cheers, > >skipp > > > >> Ron Wright <mccrpt@> wrote: > >> Steve, > >> > >> Thanks that gave me most of what I needed. Only thing the 3 in > >> C73 says VHF, but not the band segment. Guess not part of this > >> part number. Still was very good info. > >> > >> 73, ron, n9ee/r > >> > >> > >> > >> >From: "Steve S. Bosshard (NU5D)" <bosshard@> > >> >Date: 2007/11/06 Tue PM 05:52:32 CST > >> >To: [email protected] > >> >Subject: Re: [Repeater-Builder] MSR2000 info > >> > >> > > >> >http://www.batlabs.com/models.html > >> > > >> >Jim wrote: > >> >> Ron Wright, Skywarn Coodinator wrote: > >> >> > >> >>> hi all, > >> >>> > >> >>> Anyone know details of a MSR2000 with part number C73GSB-3145B. > >> >>> > >> >> > >> > > >> >-- > >> >/Subscribe to dstar_digital/ > >> > > >> >Powered by groups.yahoo.com > ><http://groups.yahoo.com/group/dstar_digital> > >> > > >> > > >> > >> > >> Ron Wright, N9EE > >> 727-376-6575 > >> MICRO COMPUTER CONCEPTS > >> Owner 146.64 repeater Tampa Bay, FL > >> No tone, all are welcome. > >> > > > > > > > Ron Wright, N9EE > 727-376-6575 > MICRO COMPUTER CONCEPTS > Owner 146.64 repeater Tampa Bay, FL > No tone, all are welcome. >

