Hello, I own and use a MSR 2000, and the preamp card IS the same as used in the Mitrex mobile. Came in three splits I believe. I use the "Low Split" for USAF MARS use @ 143 mHz.. So Mitrex is the radio to find them in. Of course some came with no board, and a white jumper was used to pass signal. I could help supply one, if you require the "Low Split" 73's de TIM W7TRH AFA5TP -------------- Original message ---------------------- From: "skipp025" <[EMAIL PROTECTED]> > The preamp for the MSR-2000 Repeater Receivers is probably not > the same as anything offered for the Mitrek Mobile Radio. The > preamplifier board slides/drops into the center of the helical > pre-selector, which is different in the mobile versus the repeater. > > cheers, > s. > > > [EMAIL PROTECTED] wrote: > > Hello, > > I believe the Mitrex used the same preamp, with same "splits"?(If we > are talking about the "plug-in" board, with the slug tuned coil). > Should be lots of Mitrex available cheap. > > 73's de TIM W7TRH/AFA5TP > > -------------- Original message ---------------------- > > From: "n6ddd" <[EMAIL PROTECTED]> > > > I am looking for either an HLD 4051A (preferred) or HLD 4052A preamp > > > card for a MSR 2000 repeater. If you have one, or know where I could > > > find one, please e mail me > > > > > > Thanks > > > > > > Arlen N6DDD > > > > > > > > > > >
--- Begin Message ---
The preamp for the MSR-2000 Repeater Receivers is probably not
the same as anything offered for the Mitrek Mobile Radio. The
preamplifier board slides/drops into the center of the helical
pre-selector, which is different in the mobile versus the repeater.
cheers,
s.
> [EMAIL PROTECTED] wrote:
> Hello,
> I believe the Mitrex used the same preamp, with same "splits"?(If we
are talking about the "plug-in" board, with the slug tuned coil).
Should be lots of Mitrex available cheap.
> 73's de TIM W7TRH/AFA5TP
> -------------- Original message ------------ --------- -
> From: "n6ddd" <[EMAIL PROTECTED]>
> > I am looking for either an HLD 4051A (preferred) or HLD 4052A preamp
> > card for a MSR 2000 repeater. If you have one, or know where I could
> > find one, please e mail me
> >
> > Thanks
> >
> > Arlen N6DDD
> >
> >
>
--- End Message ---
