Do you guys see a problem running the control link on 144.390 (APRS) or one of the 145.* packet freqs ?? As a packet mode link ?? I'm sure the 2.4g WiFi control link is fine, just want an opinion about running control capability piggy-back with the APRS and Winlink radios I'm going to have on board. All the packet, wifi, and repeater controllers are going to be hooked to a single computer. thought it would make a nice centralized way to manage the trailer remotely in all its features.
_____ From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Ron Wright Sent: Wednesday, November 07, 2007 8:38 PM To: [email protected] Subject: Re: Re: [Repeater-Builder] Part 97 question reference to Repeater control Joe, You might have a point. I cannot find either. Use to be for RF was on Auxiliary frequencies only, most of 222, most of 420-450 and above. Cannot find it is now required. Might be able to control on 14.313, hi. 73, ron, n9ee/r >From: MCH <[EMAIL PROTECTED] <mailto:mch%40nb.net> > >Date: 2007/11/07 Wed PM 01:19:27 CST >To: Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com> yahoogroups.com >Subject: Re: [Repeater-Builder] Part 97 question reference to Repeater control > >This is the part I'm looking for in the rules. I can no longer find it. > >Joe M. > >Ron Wright wrote: >> >> It can be in person, setting at the tx, or by wire (a phone line, etc) or on 222 MHz and above. > Ron Wright, N9EE 727-376-6575 MICRO COMPUTER CONCEPTS Owner 146.64 repeater Tampa Bay, FL No tone, all are welcome.
