John, Control on 144.39 is not allowed due to it not being an Auxiliary frequency. Has to be 144.5-144.8 and 146-148 on 2 meters.
Not sure about the 2.4 G WiFi for now you getting into an area that is more than RF, but strict reading of 97 would not allow it. 73, ron, n9ee/r >From: John Barrett <[EMAIL PROTECTED]> >Date: 2007/11/07 Wed PM 08:54:38 CST >To: [email protected] >Subject: RE: Re: [Repeater-Builder] Part 97 question reference to Repeater >control > > >Do you guys see a problem running thecontrol link on 144.390 (APRS) or one of >the 145.* packet freqs ?? As a packetmode link ?? Iâm sure the 2.4g WiFi >control link is fine, just want an opinionabout running control capability >piggy-back with the APRS and Winlink radios Iâmgoing to have on board. All >the packet, wifi, and repeater controllers aregoing to be hooked to a single >computer⦠thought it would make a nice centralizedway to manage the trailer >remotely in all its features. > >From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of >Ron Wright >Sent: Wednesday, November 07, 20078:38 PM >To: [email protected] >Subject: Re: Re:[Repeater-Builder] Part 97 question reference to Repeater >control > >Joe, > >You might have a point. I cannot find either. Use to be for RF was on >Auxiliaryfrequencies only, most of 222, most of 420-450 and above. Cannot find >it is nowrequired. Might be able to control on 14.313, hi. > >73, ron, n9ee/r > >>From: MCH <[EMAIL PROTECTED]> >>Date: 2007/11/07 Wed PM 01:19:27 CST >>To: [email protected] >>Subject: Re: [Repeater-Builder] Part 97 question reference to Repeatercontrol > >> >>This is the part I'm looking for in the rules. I can no longer find it. >> >>Joe M. >> >>Ron Wright wrote: >>> >>> It can be in person, setting at the tx, or by wire (a phone line, etc)or on >>> 222 MHz and above. >> > >Ron Wright, N9EE >727-376-6575 >MICRO COMPUTER CONCEPTS >Owner 146.64 repeater Tampa Bay, FL >No tone, all are welcome. > Ron Wright, N9EE 727-376-6575 MICRO COMPUTER CONCEPTS Owner 146.64 repeater Tampa Bay, FL No tone, all are welcome.
