Not to mention that it is a crystalled radio. ----- Original Message ----- From: "Jim" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, November 13, 2007 1:12 PM Subject: Re: [Repeater-Builder] Maxar 80
> Jim wrote: > >> We tried using some for link rx's in a voting system and had trouble >> getting good audio from them. The raw discriminator audio disappears >> into a chip, and comes out at speaker level on the other side. The only >> place it came out was for the volume control, and for our purpose, it >> was de-emp'd and squelched, and not usable. It might be OK for you. > > You know what? I think my memory failed me for a bit-now that I think > about it, it seems like the volume control is BEFORE the audio chip. so > raw discriminator goes through the volume control first, then into the > combination squelch/speaker amp chip. > And it seemed also like the level at the volume control was too low for > either the voter or the 7K controller. > > -- > Jim Barbour > WD8CHL > > > > > > > Yahoo! Groups Links > > >
