At 09:05 PM 11/11/07, you wrote: >I bought a msf 5000 cxb vhf station for my club to build a repeater. >this unit was rack mounted along with several public safety repeaters >so I did not get it in the original cabinet. I was shipped the power >supply, the pa and the rf deck with controller. Before shipping the >seller removed a secure board because hams do not usually need them and >we dont. I reasembled the unit in a 4' GE cabinet and connected all >the cables that were sent to me as best as i could figure out without >any instructions. When i plug the station in the 12 vdc cooling fans >come on but the control deck is dead. I found 1 cable that came from >the power supply and plugged it into a jack on the rear of the rf deck >and another cable that went to the pa from the rf deck. I also found >and connected the rf cables as needed. There are still some left over >connecter pins on the pc board at the rear of the rf deck that I do not >know what is supposed to be connected to. Inside the control deck I >see what looks like a 5 pin connector coming from the rf deck and it >does contain 13.2 vdc on the red and black wires. Something must be >missing causing the controler not to light up at all. Cam anyone >supply me a interconnect diagram so I can see if i have a missing cable. >WB5OXQ.
Look here: <http://www.repeater-builder.com/motorola/msf/msf-secure-board-removal.html> Mike