I appreciate your answers but maybe I'm not clear describing the information I am/we are looking for.
Some 16 pin radio models appear to have programmable rear connector pins while other versions of the same type/style radio do not. At least the accessory pin programming option doesn't pop up in the rss or mrss software. The list might be related to what is known as the logic board installed in the radio. So... Back to Square One: Has anyone compiled a list of 16 pin jack I/O functions available on the various mobile radios mentioned. Or the acc function options based on the installed logic board? I'm sure there are default logic pin programming assignments for the rick cos/cor and tx functions. Are they the same pins used from the m120, maxtrac, gm300, radius? yadda, yadda. I have versions of all the ricks including the I20 and I50 units... of which I'd like to see if someone has charted all the standard functions used by these radios for rick, tone remote... etc. (Pin 8 is the standard COR or TX line function type thing) I have enough Motorhead service manuals to probably reforest Nevada so that's not what I'm looking for. Yeah I could take the time to sort up a list myself but why if someone else has already done it. So..... anyone know if a practical list of the accessory plug function programming by the more common radio models has been done and made available on the web..? bk to u om s. > "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > Skipp, > Although the majority of I/O pins can be assigned "a la carte," > some RSS includes pre-programmed assignments. These are simply > defaults that can be edited to suit the particular application. > Some pins can be assigned only to inputs, some only to outputs, > and some can be either. The one rule that must be followed is > that no two or more pins may be assigned the same function- > other than null. > > The main drawback to the Motorola R.I.C.K is that it does not > have ID capability. > > As for the availability of certain manuals for download, we try > to avoid scanning and posting any copyrighted manuals while > they are still in print-unless, of course, the copyright owner > has granted explicit permission to post. > > 73, Eric Lemmon WB6FLY > > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of skipp025 > Sent: Friday, November 16, 2007 2:48 PM > To: [email protected] > Subject: [Repeater-Builder] Motorhead (Motorola) 16 pin conn Maxtrac, GM300, > M120 programming information? > > Motorhead (Motorola) 16 pin conn Maxtrac, GM300, M120, > Radius programming information? > > Is there a place on the web that describes how the 16 pin jack on > the above listed Motorola Mobile Radios can be assigned and for > what I/O Functions. > > Some radios appear ready made for the rick controller and > the many back-to-back cables sold on Ebay. But I'm sure not > all the mentioned radios can be configured for repeater and > link service. > > Some of the software for various radios comes up with an option > section to assign the pins to various logic in/out functions. It > all looks quite messy trying to figure out what every radio can > do. Has someone already done the job and posted it on the web > for public viewing? > > Thanks in advance for your replies. > s. >
