Skipp: Whether you can program the pins depends on the logic board installed - 16 pin logic boards have programmable pins, the 8 (or 2 for M120, or 1 for M10) do not.
Using the RSS, on a 16 channel radio, you can change the connector to I don't know how many standard types. After doing that, you can view the individual pin assignments also. I think that depending on the exact revision of the board, some possible combinations may or may not be available, I think reading the radio is the best bet to see what's there or what's possible. Chas, KS3Z > > > Motorhead (Motorola) 16 pin conn Maxtrac, GM300, > M120, > > > Radius programming information? > > > > > > Is there a place on the web that describes how > the 16 pin jack on > > > the above listed Motorola Mobile Radios can be > assigned and for > > > what I/O Functions. > > > > > > Some radios appear ready made for the rick > controller and > > > the many back-to-back cables sold on Ebay. But > I'm sure not > > > all the mentioned radios can be configured for > repeater and > > > link service. > > > > > > Some of the software for various radios comes up > with an option > > > section to assign the pins to various logic > in/out functions. It > > > all looks quite messy trying to figure out what > every radio can > > > do. Has someone already done the job and posted > it on the web > > > for public viewing? > > > > > > Thanks in advance for your replies. > > > s. > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > (Yahoo! ID required) > > mailto:[EMAIL PROTECTED] > > > ____________________________________________________________________________________ Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how. http://overview.mail.yahoo.com/
