At 11:43 AM 01/29/08, you wrote: >Sorry to bring this back up the pull up resistor did not start the >COR. Looking at the schematic the MMBT3904 NPN is connected to pin 8 >from this a 10k resistor takes it to the MC68xxx processor. Best guess >? programming? or NPN transistor. > >Thanks, > >Henry
The design of the GM300 can be traced back to the Maxtrac, and much of the background material for the Maxtrac applies to the GM series. If you look at this page <http://www.repeater-builder.com/maxtrac/maxtrac-index.html>, one of the notes says "On any radio that is new to you do NOT assume that any accessory connector pin programming is present, or if it is there, is correct for your environment." Are you certain that your radio is programmed for COR? Mike WA6ILQ