Check out:
www.repeater-builder.com/products

Look under the antenna section for Tram antennas.

Scott

Scott Zimmerman 
Amateur Radio Call N3XCC
612 Barnett Road
Boswell, PA 15531
  ----- Original Message ----- 
  From: Jim Miller WB5OXQ in Waco 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Saturday, January 26, 2008 2:59 PM
  Subject: Re: [Repeater-Builder] Antenna question for the forum.


  If either takes a lightning strike the fiberglass will explode.  I have had 
that happen with both.
  Check into Tram antennas.  they seem electrically and mechanically similar to 
the diamond but are a lot cheaper!
  WB5OXQ

    ----- Original Message ----- 
    From: w2sxk 
    To: Repeater-Builder@yahoogroups.com 
    Sent: Friday, January 25, 2008 3:43 PM
    Subject: [Repeater-Builder] Antenna question for the forum.


    Goodafternoon,

    Me and a friend are putting up a secondary VHF repeater and have a 
    antenna question. Being we are on a budget but have looked at these 2 
    antennas as options.

    Diamond F22A monoband base or the Husler G6-144B 

    Any pros or cons to these antennas and which would you choose or you 
    have another option?

    Antenna will be mounted between 30-40' on multiuse rohn 45 tower fed 
    with LMR-400 and subjected to typical Northeast USA weather "North of 
    NYC". Ofcourse if money wasn't an issue, I would prompt for a more 
    durible antenna specifically suited for repeater use. We need to keep 
    antenna size down to less then 10' in length and cost down as well. 
    My choice was the Diamond F22A. It apears similiar in size and 
    construction to the X-200 dual band and I have not had any issues 
    with my current intallation. Any comments or suggestions???

    73,
    Steve - W2SXK
    [EMAIL PROTECTED]



   


------------------------------------------------------------------------------


  No virus found in this incoming message.
  Checked by AVG Free Edition. 
  Version: 7.5.516 / Virus Database: 269.19.16/1251 - Release Date: 1/30/2008 
9:29 AM

Reply via email to