Dave, There is a wealth of information available at: http://www.repeater-builder.com/motorola/msf/msf-index.html Be sure to drill down through the "sub-pages" and links...
Also, the UHF Repeater Station Service Manual is available from Motorola: Part #6881062E75 Price is $57.52 USD available from http://www.myradiomall.com/ or direct form Motorola if you have an account set up with Motorola parts. My MSF5000 is a 900 MHz unit, so I'm not sure whether the connections would be the same or not... My thinking is that with the level of microprocessor control involved in this station, you'd probably get error codes up the ying-yang and not be able to test it without all parts properly connected/terminated. Good luck es 73! Mark - N9WYS -----Original Message----- From: [email protected] On Behalf Of dave_g7uzn Hi Gang, I have received a uhf 5000 less pa unit and am therefor presented with plugs and sockets hanging out of the rf tray! They are as follows.... 9 way power sil socket ...red,white,brown,black,blue,orange,green 6 way plug to pa metering...green,black,white,red,brown,orange 40 way ribbon to remote control I don't have a manual so don't know where to shove some dc to check the rx and tx driver! Could some kind soul suggest the minimum connections to test the unit out please without hundreds of alarms! Cheers Dave UZN
