That's not true Michel... per the manual: "They type of audio used from the receivers can be just about any type as long as all of the receivers use the same audio. Audio types that are acceptable are line level and speaker audio.
Also, it does not matter if the audio is de-emphasized or not as long as all of the receivers are the same." It goes on to mention that audio response is the biggest challenge, try and get the audio response the same on all channels for best performance. http://www.ldgelectronics.com/manuals/RVS-8Manual.pdf Lee --- In [email protected], "VA2MAA" <[EMAIL PROTECTED]> wrote: > > Hello Tyler, > I am pretty sure the voter require discriminator (flat RX), > in order to evaluate the SNR correctly. Using pin 11 on Maxtrac > is fine but make sure you change JU551 to the A position. > (see http://batlabs.com/maxrad.html 9600 baud packet conversion) > > You will probably have to de-emphase the audio signal out of the > voter, to feed your TX, unless you have a flat TX input available. > > 73, VA2MAA >
