Are you *sure* you mean "watchdog timer", or do you mean "Timeout timer"??
I am sure that the watchdog timer in the modules are not causing troubles for you. If they are, there is a reason why they are tripping and there are other problems in the modules. If you are talking about the timout timers, they can be disabled through the programming software. You say that you don't have a way to program them. Realize you can build a R100 programming cable by using the info here: http://www.batlabs.com/images/r100.gif Here is the info to modify the software to work in the ham bands: http://www.batlabs.com/r100.html As far as software goes: you can dig around the internet or ask someone if they have a copy they can send you privately. Best of luck, Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Rd Boswell, PA 15531 ----- Original Message ----- From: Dave and Julie Corrigan To: [email protected] Sent: Saturday, September 13, 2008 2:27 AM Subject: Re: [Repeater-Builder] How to disable a R-100 Watch dog timer? Hi Juan, I have done that, bypassed the stock controller. Turns out that the RX and TX command boards each have a watchdog timer on them. Supposedly you can reprogram them to turn off the timer, but, no programming hardware here or in this area so that option is out. -Dave, KB7SVP Juan Tellez wrote: I have done when use an external controller, completely disconnect the "big board" and wire it direct to RX/TX assemblies, if you got the manuals is easier. Juan ---------------------------------------------------------------------------- ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.21/1671 - Release Date: 9/14/2008 7:16 AM
