The NHRC-4 two port controller does a nice job. I have 3 that I built from kits and have less than $70 a piece in them. The software upgrade they are delivering now is very straightforward to use and works very well.
73 - Jim W5ZIT --- On Wed, 9/24/08, Joe Burkleo <[EMAIL PROTECTED]> wrote: From: Joe Burkleo <[EMAIL PROTECTED]> Subject: [Repeater-Builder] Re: Wanted: 2-port controller To: Repeater-Builder@yahoogroups.com Date: Wednesday, September 24, 2008, 6:17 PM Sorry I do not have anything used. Not sure what a new CAT200 will set you back these days, but if you are looking for a inexpensive 2 port controller, I would look at one of Brian's Linker IIA ICS controllers for under $140. Joe --- In Repeater-Builder@ yahoogroups. com, "kk2ed" <[EMAIL PROTECTED]> wrote: > > I have a need for a cheap 2-port controller for a commercial repeater > project. One repeater and one link port. > > Before I go order a new CAT 200, does anyone on the list have something > similar that they're looking to get rid of? > > > Thanks > Eric > KE2D >