You might want to look at the CAT Auto RLS-1000 aka RBS-1000 unit. s.
> "kk2ed" <[EMAIL PROTECTED]> wrote: > > I actually have four of the SCOM 7330s in service right now. Probably > the best hardware design available of all the controllers. However, > it is overkill for this simple project. I just need something simple > enough for a repeater and link, providing cos/ptt switching and audio > gating/mixing. It will be mounted inside a GR300 housing in place of > the Motorola controller. No need for IDs or tones. > > The Linker IIa or CAT400 looks to be the best bet. Before I pulled > the trigger on placing an order, I figured I would see if anyone had > a used one for sale. Otherwise I will place an order in the next day > or so. > > Eric > KE2D > > > --- In [email protected], "Mike Mullarkey" <k7pfj@> > wrote: > > > > Hi Eric, > > > > > > > > Call Bob from SComm, He has a new controller that the layout is > some of the > > best I have seen. I would use it on any of my commercial gear any > day. > > > > > > > > > > > > > > > > Colorado Telecom, L.L.C > > > > Mike Mullarkey K7PFJ > > > > _____ > > > > From: [email protected] > > [mailto:[EMAIL PROTECTED] On Behalf Of kk2ed > > Sent: Wednesday, September 24, 2008 4:39 PM > > To: [email protected] > > Subject: [Repeater-Builder] Wanted: 2-port controller > > > > > > > > I have a need for a cheap 2-port controller for a commercial > repeater > > project. One repeater and one link port. > > > > Before I go order a new CAT 200, does anyone on the list have > something > > similar that they're looking to get rid of? > > > > Thanks > > Eric > > KE2D > > >
