900mhz is unforgiving.
Make sure you are getting a silver plated connector.
RF Parts has the actual UG58 that you need for $2.85,
on the page at <http://www.rfparts.com/c-typen.html>
but they do have a $25 minimum. I'm sure that you
can find something else on the their web site to make
up the difference.
Personally I won't use anything but Amphenol or
Kings at 900MHzm and it HAS to be silver
plated - no nickel,
Mike WA6ILQ
At 09:11 AM 10/05/08, you wrote:
don't know
I'll call them tomorrow and ask what the difference is
G
----- Original Message -----
From: <mailto:[EMAIL PROTECTED]>Bob M.
To: <mailto:[email protected]>[email protected]
Sent: Sunday, October 05, 2008 11:08 AM
Subject: Re: [Repeater-Builder] perhaps OT: need connector
Any reason you can't use the connector that's listed in the Mouser
catalog above or below the UG-58? It's still an N female, four-hole
chassis mount.
Mouser p/n 523-82-97-RFX
Over 1000 in stock, cost under $5.
Bob M.
======
--- On Sun, 10/5/08, Gary Glaenzer
<<mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]> wrote:
> From: Gary Glaenzer <<mailto:[EMAIL PROTECTED]>[EMAIL PROTECTED]>
> Subject: [Repeater-Builder] perhaps OT: need connector
> To:
<mailto:Repeater-Builder%40yahoogroups.com>[email protected]
> Date: Sunday, October 5, 2008, 10:09 AM
> Hello all;
>
> I'm trying to resurrect a 'Hybrid Ring
> Combiner'; it takes two 950 MHz
> broadcast STL transmitters into a common antenna
>
> I need one of the chassis-mount N-female connectors, it has
> one of the 4
> 'fingers' broke off the center connector
>
> UG-58 A / U is stamped on them
>
> Mouser says 'not in stock, minimum order 50'
>
> Anyone have one of these around ?
>
> Thanks !
>
> Gary
----------
Checked by AVG - http://www.avg.com
Version: 8.0.173 / Virus Database: 270.7.6/1709 - Release Date:
10/5/2008 9:20 AM
