It doesn`t exist. Motorola insists it can only be serviced by them at their
depot. Keep your Micors.
----- Original Message -----
From: Camilo So
To: [email protected]
Sent: Monday, October 20, 2008 7:15 PM
Subject: Re: [Repeater-Builder] MTR2000 UHF Service manual
Oh I forget to mention that I did order a service manual from Motorola
6681096E25 its don't have any circuit diagram on it, What is the correct manual
number to order
that have a circuit diagram.
----- Original Message -----
From: Camilo So
To: [email protected]
Sent: Monday, October 20, 2008 9:08 PM
Subject: [Repeater-Builder] MTR2000 UHF Service manual
Need help to order a MTR2000 service manual that have the schematic diagram
of the receiver unit, Got this unit from Ebay, Hook up the unit on my bench
with a dummy load on the TX out, and apply signal on the RX input with a
IFR1200, The squelch open at 0.12 micro-volt at 0.15 uv its 12 DB Sinad, when
signal
was increased to about 1.0 micro-volts or higher the receiver drop out, as
if the agc is overloaded that cut out completely and also drop the TX, Have
anyone ever
experience this problem before, This is the first time I have seen this
kind of problem , and its hard to fix it w/o a diagram. any help is highly
appreciated.
de w4cso Camilo
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.175 / Virus Database: 270.8.2/1738 - Release Date: 10/21/2008
2:10 PM
