Do you know of a good place to have the cables made? I suck at doing coax and I am sure this needs to be quality. This is my 2 repeater and the first time really dealing with duplexers. The first system the duplexers where wacom and allready tuned. Thanks -Jason
--- On Sun, 11/23/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: From: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Subject: Re: [Repeater-Builder] Sinclair q202gc duplexers To: [email protected] Date: Sunday, November 23, 2008, 5:42 AM At 11/21/2008 20:03, you wrote: >I am new to the sinclair line of duplexers. I have a set of used vhf >duplexers setup in the high vhf range. current freqs are 165.2375 and >165.1375. Has anyone had luck changing the coax harness to the longer >36cm and getting the duplexers to tune down to the two meter band? Direct answer: yes. To get it to work on 2 meters, the jumpers running from each can to the attached Ts need to be lengthened. Although I got acceptable from the one I had after doing this, for optimum performance all the cables need to be lengthened. Bob NO6B
