I asked a local Yaesu dealer if the have B stock on the VX-2100. Its an 8 channel commercial with a DB15 on the back. The baby brother of the VX-4200's that I have. EASY to make a repeater from.
--- In [email protected], "Mike Besemer \(WM4B\)" <mwbese...@...> wrote: > > Yeah. I've probed all over the board looking for usable signals (or > something that could be converted to a usable signal) without much luck. I > think I did find something once but was unable to tap it without a scanning > electron microscope and a laser! > > > > 73, > > > > Mike > > WM4B > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Bob Ricci > Sent: Tuesday, January 13, 2009 1:53 AM > To: [email protected] > Subject: [Repeater-Builder] Re: Yaesu FT-2800 Solutions > > > > I'm not getting any replies, so I think that I need to take the > 2800's back and switch to 7800's with a packet connector. The 2800 > appears to have better receive, but the milspec board and ultra small > components make it tough to work on., > > Bob - AF6D > http://hamradiohosting.net > > --- In [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> , "Mike Besemer \(WM4B\)" > <mwbesemer@> wrote: > > > > Bob, > > > > > > > > If you get the answer, PLEASE post it here. I replied to the > original email > > from Dave many months ago and haven't heard back. Inquiring minds > want to > > know. > > > > > > > > 73, > > > > > > > > Mike > > > > WM4B > > > > > > > > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of Bob Ricci > > Sent: Sunday, January 11, 2009 3:58 AM > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: [Repeater-Builder] Re: Yaesu FT-2800 Solutions > > > > > > > > I purchased two new ft-2800's today to build a repeater. ANY > > information would be appreciated. > > > > Bob - AF6D > > > > --- In [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > <mailto:Repeater-Builder%40yahoogroups.com> , "wb7cjq" <wb7cjq@> > wrote: > > > > > > Anybody wanting to use the 2800 as the receive side of a repeater > > > and/or remote base or Echolink system, I have (as of today) the > > > answers!!! > > > > > > I can get you discriminator level "gated" audio as well as a COS > type > > > signal. Both will require external circuitry, but I've found > those > > > hidden little guys!!! > > > > > > Email or just post here. > > > > > > 73, > > > > > > Dave. > > > > > >
