I have a remote receiver site at a 900 mHz distribution point where the 2.4 gHz baseband is distributed down on 900 mHz and the noise is really bad. I can't copy my repeater to test the remote receiver till I walk about 200 ft from the tower where the 900 mHz stuff is located.
I have a GE Mastr II remote receiver with the squelch set as tight as it will go to squelch out the digital noise. During the squelch tail before the PL squelch closes it sounds just like a packet station in the receiver. We are looking for another site for that remote, as the site with the 900 mHz stuff is unusable. 73 - Jim W5ZIT --- On Wed, 1/21/09, Paul N1BUG <[email protected]> wrote: From: Paul N1BUG <[email protected]> Subject: [Repeater-Builder] 900 MHz WISP on repeater tower? To: [email protected] Date: Wednesday, January 21, 2009, 3:34 PM I could use a little help here. I have a repeater tower with 2 meter and 440 repeater on it. I have been contacted by a wireless internet service provider about putting some 900 MHz stuff on my tower. The deal they are offering is attractive but I'm wondering if there would be interference issues between their stuff and my repeaters. I'm going to be setting up a meeting to discuss technical aspects of the proposed system, but I have no experience or knowledge in this area and am not sure what questions I should be asking them. Any suggestions or advice? Thanks! Paul N1BUG
