Hi group whats the deal with the GE Master II PA decks needing to use a
ferrite isolator with a 50 ohm dummy load and a low pass filter between
the PA and the High Q duplexer. Is this something that most do with
the 75 and 100 w Pa's We just replaced one in a Master II Mobile radio
which lasted for years with no issues. After installing the PA and
doing a tune up the Radio did about 80 watts we set it to 45 watts I
was also told that was not a good thing to do so whats the story on the
PA. I seen where Repeater Builder the Company talks about the 75 or 100
watt PA's in there web site only bening good set to 45 watts or so
anyway so I assume they are setting theres at that level when they do a
Duplex conversion ect making the radio into a repeater. I have read the
information on the website about this but would like some user comments
as well. Also where would one get the needed parts ect to do this Mod.
Randy
