Question is that the Length Before the Element is Bent? or is that already bent measurinf from Tip to tip?
--- On Sat, 2/7/09, Chuck Kelsey <wb2...@roadrunner.com> wrote: > From: Chuck Kelsey <wb2...@roadrunner.com> > Subject: Re: [Repeater-Builder] Decibel folded dipole > To: Repeater-Builder@yahoogroups.com > Date: Saturday, February 7, 2009, 6:23 PM > The overall length of one element for 450-470 MHz should be > about 11-3/16" > > The overall length of one element for 406-420 MHz should be > about 12-1/2" > > Chuck > WB2EDV > > > ----- Original Message ----- > From: "mike" <m...@verizon.net> > To: <Repeater-Builder@yahoogroups.com> > Sent: Saturday, February 07, 2009 6:00 PM > Subject: [Repeater-Builder] Decibel folded dipole > > > > Hi all > > I am looking for someone that may have modified a > Decibel four bay > > folded dipole antenna to operate in the UHF hamband. > I'm not sure if > > the one I have is 450-470 or the lower UHF 420 type > there is no tag on > > this one. > > Thanks in advance > > Mike > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >