--- In Repeater-Builder@yahoogroups.com, "Chuck Kelsey" <wb2...@...> wrote: > Shouldn't the length of the phasing harness also be adjusted?
> Tip to tip of the element. > > > ----- Original Message ----- > From: "neal Newman" <cozy...@...> > To: <Repeater-Builder@yahoogroups.com> > Sent: Saturday, February 07, 2009 6:34 PM > Subject: Re: [Repeater-Builder] Decibel folded dipole > > > > > > Question is that the Length Before the Element is Bent? or is that already > > bent measurinf from Tip to tip? > > > > > > --- On Sat, 2/7/09, Chuck Kelsey <wb2...@...> wrote: > > > >> From: Chuck Kelsey <wb2...@...> > >> Subject: Re: [Repeater-Builder] Decibel folded dipole > >> To: Repeater-Builder@yahoogroups.com > >> Date: Saturday, February 7, 2009, 6:23 PM > >> The overall length of one element for 450-470 MHz should be > >> about 11-3/16" > >> > >> The overall length of one element for 406-420 MHz should be > >> about 12-1/2" > >> > >> Chuck > >> WB2EDV > >> > >> > >> ----- Original Message ----- > >> From: "mike" <m...@...> > >> To: <Repeater-Builder@yahoogroups.com> > >> Sent: Saturday, February 07, 2009 6:00 PM > >> Subject: [Repeater-Builder] Decibel folded dipole > >> > >> > >> > Hi all > >> > I am looking for someone that may have modified a > >> Decibel four bay > >> > folded dipole antenna to operate in the UHF hamband. > >> I'm not sure if > >> > the one I have is 450-470 or the lower UHF 420 type > >> there is no tag on > >> > this one. > >> > Thanks in advance > >> > Mike > >> > > >> > >> > >> ------------------------------------ > >> > >> > >> > >> Yahoo! Groups Links > >> > >> > >> > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > >