James, What is "screwy" about the diagram? Other than not clearly identifying pins 4 and 7, it is correct. The linked forum item does not address the mike connector numbering. I don't see the connection.
73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of crackedofn0de Sent: Saturday, February 07, 2009 4:24 PM To: [email protected] Subject: [Repeater-Builder] Re: M1225 programming problem --- In [email protected] <mailto:Repeater-Builder%40yahoogroups.com> , Jeff Clark <je...@...> wrote: > > Hope this is the correct group for this kind of question. I'm trying > to program two m1225 UHF mobiles with a Polaris PA-II rib and a cable > assembled per the batlabs cable page (listed same as GM300). I've > checked and double checked the connections on both ends and made sure > the tab on the rj45 end is oriented according to the diagram, but > when I plug it in to the mic jack and turn on the rib, the radio keys > up and stays keyed until I kill the power or pull the plug. > > I've tried this on both radios with the same result, and I've > programmed my P1225s with the same rib, so I'm wondering if the > pinout on the rj45 jack is wrong. Are there additional pinouts beside > the one listed on the batlabs page? > > thanks, > > --jeff, kf6bkg The diagram on batlabs is a little screwy. I started a big ugly thread on this years ago: http://batboard.batlabs.com/viewtopic.php?t=5955 <http://batboard.batlabs.com/viewtopic.php?t=5955> James K7ICU
