Oppps TYPO.. 300 watts not 3kw LOL Neal
--- On Wed, 2/18/09, larryjspamme...@teleport.com <lar...@teleport.com> wrote: > From: larryjspamme...@teleport.com <lar...@teleport.com> > Subject: Re: [Repeater-Builder] Good conversion choice for 1st 6 meter > repeater? > To: Repeater-Builder@yahoogroups.com > Date: Wednesday, February 18, 2009, 7:36 PM > We should be able to hear that 3000 Watt MASTR II repeater > all day, every day! > > -----Original Message----- > >From: neal Newman <cozy...@yahoo.com> > >Sent: Feb 18, 2009 4:18 PM > >To: Repeater-Builder@yahoogroups.com > >Subject: Re: [Repeater-Builder] Good conversion choice > for 1st 6 meter repeater? > > > > > > Hey Joe > > Im running the same thing a Converted Mitrek on > 52.71/53.71 > > with a hardline Duplexer. ( off air at moment due to > loosing duplexer in the house fire. setup worked great. > Other machine is a MastrII 3000 watt repeater with Full size > Commercial Duplexers.. Both are easy Conversions that work > well. > > Neal-ka2caf > > > > > >--- On Wed, 2/18/09, Joe <k1ike_m...@snet.net> > wrote: > > > >> From: Joe <k1ike_m...@snet.net> > >> Subject: Re: [Repeater-Builder] Good conversion > choice for 1st 6 meter repeater? > >> To: Repeater-Builder@yahoogroups.com > >> Date: Wednesday, February 18, 2009, 8:35 AM > >> I have a 6 meter repeater that I am putting > together for a > >> club here in > >> Connecticut. It uses a Mitrek 110 watt mobile > radio. A > >> ham friend did > >> the conversion and said that it was fairly simple > to do. > >> So far, it > >> seems to be working OK at 50 watts output. I have > a CE > >> MASTRII n my 6 > >> meter repeater and it has been performing > flawlessly for > >> years now. > >> Both radios seem to make good conversion > prospects. > >> > >> The big question for a 6 meter repeater is: Are > you going > >> to use a > >> duplexer or split site? If you do a split site > it may be > >> a little > >> easier to use MASTRII radios. > >> > >> 73, Joe, K1ike > >> 53.41TX/52.41RX PL 156.7Hz > >> > >> Mark wrote: > >> > Something GE or Motorola, but what? > >> > > >> > I'd like to build a 6 meter repeater. > And, > >> > this'll be my first repeater to build. > What would > >> > be a good choice for conversion? Definitely > something > >> > VHF lowband- 35 to 42 MHz or better, but > what? I'm > >> more > >> > familiar with GE units than Motorola, but > that > >> doesn't > >> > rule out a Micor or something else. Any > suggestions? > >> > > >> > Thanks and 73! > >> > > >> > Mark KE5LIB > >> > > >> > >> > >> > >> ------------------------------------ > >> > >> > >> > >> Yahoo! Groups Links > >> > >> > >> > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >