> All the DM 4076 pictures show roung cans,
The round can versions came later, first tan in color, then grey, then
ultimately Decibel "Tek Black". The square ones were the earliest ones -
they started out a lighter tan (lighter than yours), and then went to that
mocha color like you have. As for the harness, the type of cable, and the
length of the cables, changed several times over the manufacturing lifetime
of the series, and not necessarily corresponding with changes in exterior
paint color.
> What has hapened is my grandson removet the cables and i need a
> location to where the go. do you have any cable dem? as showen
> on the picture I have two cables that most have went to the Tee,
> they are different size.
If you measure the cables you have, I can tell you which vintage it most
likely is, and also tell you what the factory standard configuration for the
cavities was. Note that there was some asymmetry in those cavities - the
directional orientation of the cavity as installed in the harness will make
it perform better as a high-pass cavity and by reversing it it will work
better low-pass. You're going to need real test equipment in order to
figure out which is which if you have any doubt as to how they are currently
arranged if you want them to work optimally.
--- Jeff WN3A
