--- In [email protected], "Jeff DePolo" <j...@...> wrote: > > > All the DM 4076 pictures show roung cans, > > The round can versions came later, first tan in color, then grey, then > ultimately Decibel "Tek Black". The square ones were the earliest ones - > they started out a lighter tan (lighter than yours), and then went to that > mocha color like you have. As for the harness, the type of cable, and the > length of the cables, changed several times over the manufacturing lifetime > of the series, and not necessarily corresponding with changes in exterior > paint color. > > > What has hapened is my grandson removet the cables and i need a > > location to where the go. do you have any cable dem? as showen > > on the picture I have two cables that most have went to the Tee, > > they are different size. > > If you measure the cables you have, I can tell you which vintage it most > likely is, and also tell you what the factory standard configuration for the > cavities was. Note that there was some asymmetry in those cavities - the > directional orientation of the cavity as installed in the harness will make > it perform better as a high-pass cavity and by reversing it it will work > better low-pass. You're going to need real test equipment in order to > figure out which is which if you have any doubt as to how they are currently > arranged if you want them to work optimally. > > --- Jeff WN3A > Jeff here you go
12" 8 5/8 " 10" 8 1/2" The two short ones are the cav conecters. the others are for the Tee. Dave Ka9gfs
