Are you tuning the TX or the RX VCO? The K and the K2 overlap coverage from 146 to 150mhz. From what I understand the RX pre-select really determines freq coverage on those models.
----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Tue Apr 07 12:57:47 2009 Subject: Re: [Repeater-Builder] TKR-750 At 10:18 AM 4/7/2009, Randy Brumback wrote: >I need to tune the VCO for my amateur frequency in the TKR-750. Does >this unit need to be hooked to the computer and set in some way >before tuning? I am at the very low end of what the repeater will >program to at 147.060 and I can't get the right voltage on the Test >Point by tuning the capacitor. The voltage is well below what it should be. > > <---Must not be a K2 version. Is it a K? But no, it does not need to be connected to a PC in order to align it Ken ---------------------------------------------------------- President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ <http://www.arcomcontrollers.com/> Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net <http://www.irlp.net> "We don't just make 'em. We use 'em!"
