Thanks Eric , for your response. regards savy
--- On Fri, 5/15/09, Eric Lemmon <[email protected]> wrote: From: Eric Lemmon <[email protected]> Subject: RE: [Repeater-Builder] Using the Motorola CDM1250 radio for Repeater setup. What level should the mic ? To: [email protected] Date: Friday, May 15, 2009, 12:45 PM You don't need to adjust anything on the receive radio. However, on the transmit radio, the CDR700 service manual suggests setting the "Accessory Mic Gain" to 31.5 or 33.0 dB. Further adjustment will be made in the controller. All of the setup details are in the CDR700 service manual 6864110R66, available from Motorola Parts (800-422-4210) for about $15. 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@ yahoogroups. com [mailto:Repeater-Builder@ yahoogroups. com] On Behalf Of Peter Summerhawk Sent: Friday, May 15, 2009 9:24 AM To: Repeater-Builder@ yahoogroups. com Subject: RE: [Repeater-Builder] Using the Motorola CDM1250 radio for Repeater setup. What level should the mic? Hello Group, I am on the verge of setting up a Motorola GR500 repeater using the motorola CDM1250 radios. My question is, what level should the microphone gain level be set to, on the Receiver radio? For I have seen in some radios their default setting is usually 27.0 and 28.5 dB. I all appreciate your thoughts on this. Thanks in advance Regards Savy
