Although Polyphaser protectors have a large and loyal following, they are
seldom used in high-end commercial two-way and cellular sites, where the
preference is for Huber+Suhner devices.  H+S protectors are very expensive-
perhaps four or five times the cost of a Polyphaser- but they are machined
out of stainless steel, are waterproof, and have easily-replaceable gas tube
elements that are available in a wide range of ratings.  When you have a
revenue-producing station that is costly to build, you don't skimp on
lightning protection.  More info about H+S protectors is here:

<www.hubersuhner.com/ie70/products/hs-p-rf/hs-rf-lightning-protectors.htm>
or
<http://tinyurl.com/lnos4d>

However, since the majority of non-revenue repeater owners are satisfied
with Polyphasers, it should be pointed out that there are many models of
protectors in the Polyphaser catalog.  The purchaser should take care to
select the particular model that allows the least amount of energy
let-through for a given operating frequency and power level.  The protectors
are designed for a specific connection arrangement, and the antenna and
equipment sides should not be reversed.  The Polyphaser gas tube elements
are soldered in place, and are not easily replaceable.

Regardless of the brand of lightning protector used, it is very important
that the protector body have an effective connection to ground over as
low-impedance path as possible.  Chris' comment about AC power line
protection is a good one.  Any phone or control lines entering the station
should also be protected with gas tube arrestors.

73, Eric Lemmon WB6FLY
  

-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of ccour79992
Sent: Friday, July 10, 2009 4:13 PM
To: [email protected]
Subject: [Repeater-Builder] RE: Lightning Protection



I agree on the Polyphaser suggestion.

Dont forget the AC power protection. I suggest Transtector SL plug in
series, not cheap, but they work quite well.

Also, how does a Polyphaser fail? Open? Closed? And are they truly multiple
strike capable?

Chris
KC4CMR

Reply via email to