Here is the original response & the link. Good luck!! Tim
agrimm0034 wrote: > Hi. I'm looking to build a MDC1200 decoder for my repeater to monitor the > activity. Anyone else tried to construct one or can help me out? Thanks > > You may be interested to know about a C library I wrote. See http://www.matthew.at/mdc/ Requires the ability to capture audio samples and feed them to the library. It is also not that difficult to port this to run on a PIC microcontroller using a single bit for audio input. Matthew Kaufman --- In [email protected], "agrimm0034" <agrimm0...@...> wrote: > > If you could dig up that email, that would be great. You can either repost on > here or email that directly to me. Thanks > > > --- In [email protected], "tahrens301" <tahrens@> wrote: > > > > One of the guys here had written some C code that > > runs on a PC that you could use.. think you plug > > the RX audio into the sound card. If you want, > > I can dig up the e-mail. I think I saved it. > > > > A hardware solution would be to get one of the Motorola > > desktop MDC units. They have a LED display on it. > > Don't know the model #, but could probably find on > > e-bay. > > > > Tim > > > > > > --- In [email protected], "agrimm0034" <agrimm0034@> wrote: > > > > > > I posted a similiar topic a while back but I can't remember what exactly > > > some advise was gave. I need to find a mdc1200 decoder to either build or > > > relativly cheap such as on ebay. I have a repeater that uses several > > > Motorola radio's using MDC to ID there self. I've searched and found a > > > couple made by Control Signal and found out there outrageous. Is there > > > any off brand's or ebay searches I could do to help me out??? Thanks > > > > > >
