John, how's this for an experiment... Configure a repeater with two receivers, one built for +/- 5 kHz deviation, the other for +/- 15, feed them from a splitter, use audio from the narrow one, but allow a DTMF command to select the wider receiver's COS when conditions warrant. (Obviously, those conditions would have to include no adjacent channel signal...)
Or, four receivers...I've always wanted to play with H/V polarization diversity when the band was up! ;^) 73, Paul, AE4KR ----- Original Message ----- From: John Sehring To: Repeater-Builder@yahoogroups.com Sent: Thursday, August 20, 2009 4:36 PM Subject: [Repeater-Builder] Squelch action on 10 m FM BTW, the less the deviation, the harder it is to design reliable squelch circuits. It was easier in the +-15 kHz deviation daze. The supersonic audio spectrum will be different for other tx deviation/rx IF bandwidth situations... .