Found It....
http://efjohnson.com/PDF/manuals/7600ServMan.pdf
Doug
KD8B
Doug Bade wrote:
There are cables on ebay for usually less than you can build one for.
You might look there first....
There is also an online pdf of the service manual on the EF Johnson
website ( under their model number unfortunately) as apparently at one
time Icom made this radio and it was rebadged as an EFJ.. I found the
manual accidentally while google-ing info on the hybrid PA brick it
uses. The manual was far more comprehensive than the version Icom
released to us dealers..
Complete alignment details are in there... I do not recall the link but
I can look around to try to find the PDF... I have downloaded somewhere..
Doug
KD8B
Sean wrote:
>
>
> Thanks now to build a programing cable, I have software just no cable.
>
> Sean
>
> --- In [email protected]
<mailto:Repeater-Builder%40yahoogroups.com>
> <mailto:Repeater-Builder%40yahoogroups.com>, Matthew Kaufman
> <matt...@...> wrote:
> >
> > Sean wrote:
> > > I just had one programed at the local radio shop and the display
> blinks which I'm assuming means the vco wont lock on the frequency,
> how do I retune the vco on the radio?
> > >
> > > Sean
> > >
> > See http://www.mods.dk/view.php?ArticleId=3550
<http://www.mods.dk/view.php?ArticleId=3550>
> <http://www.mods.dk/view.php?ArticleId=3550
<http://www.mods.dk/view.php?ArticleId=3550>>
> >
> > Adjust the VCO, then let the software do the peaking.
> >
> > Matthew Kaufman
> >
>
>
