Re: Micor and MSR-2000 CTCSS PL Module Stories
The only Micor to MSR-2000 equivalent Modules I've confirmed is the Squelch Gate Module. Keeping in mind the Module End Connector needs to be changed. I have not compared the Decoder Modules and I don't see a mention of the rare Encoder Module, which should also be described in the manual. I have seen and copied the PL Module mod of mounting a TS-32 Encoder/Decoder on small aluminum plate bolted onto the module with stand-offs. The added TS-32 CTCSS Encoder Decoder can be wired to act in ether function if you have a half duplex PL Module or in the case of a full duplex module you can add an additional decode tone, which in most cases would provide an end result cross code CTCSS function. Anyway... In cases where multiple CTCSS functions are required I just added a Tone Panel. cheers, s. > Mike Morris WA6ILQ <wa6...@...> wrote: > Does anyone have any docs on either of these two modules? > I've had a couple of emailed inquiries, and none of the local > suspects has a manual that shows it. > > Micor version: the TLN5745x (where x is the A or B) > MSR2000 version : TRN5329x (ditto) > > As I understand it the two modules are identical except for the color > of the end plate and the connector that goes into the card cage. > > Both of these are stand-alone 4-tone PL decoders that slide into > the tone burst decoder slot. > > They are NOT the 4-tone cards that were part of the community > repeater version of the station. > > My contact at Moto doesn't have anything except for numbers > of a couple of SP manuals. > > Mike WA6ILQ >
