Good Question Joe
Wesley
----- Original Message -----
From: "Joe" <[email protected]>
To: <[email protected]>
Sent: Sunday, October 18, 2009 5:56 PM
Subject: Re: [Repeater-Builder] Wavetek 3000
> Instead of soldering the damaged IC to the board, I wonder if you could
> buy headers that plug into the IC board socket and solder the IC to the
> header?
>
> Joe
>
>
> DCFluX wrote:
>>
>>
>> As I undersstand it wavetek put some kinda anti oxidizing goo on the
>> IC pins. But it had the side effect of disolving the IC pins after
>> quite some time. So the solusion was to replace the ICs or trying to
>> solder the IC to the board to make good contact with the pins.
>
>
>
> ------------------------------------
>
>
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[email protected]
mailto:[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
