This is a bit off topic, But I have an extra Service Manual for the 3000 SSI Wavetech. The plastic Binder is flakey, but the pages are good. Please leave msg at [email protected] if you have interest.
--- In [email protected], "Wesley Bazell" <wesley...@...> wrote: > > > Good Question Joe > > Wesley > ----- Original Message ----- > From: "Joe" <k1ike_m...@...> > To: <[email protected]> > Sent: Sunday, October 18, 2009 5:56 PM > Subject: Re: [Repeater-Builder] Wavetek 3000 > > > > Instead of soldering the damaged IC to the board, I wonder if you could > > buy headers that plug into the IC board socket and solder the IC to the > > header? > > > > Joe > > > > > > DCFluX wrote: > >> > >> > >> As I undersstand it wavetek put some kinda anti oxidizing goo on the > >> IC pins. But it had the side effect of disolving the IC pins after > >> quite some time. So the solusion was to replace the ICs or trying to > >> solder the IC to the board to make good contact with the pins. > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > >
