Also i am running the system up on 465.61244 RX and 470.79996 TX
and the Transmiter i am running is a Tait T856-24 with a T341 Tx Monitor
duplexor
T345 Receiver T343 Receiver Monitor + a text panel
Marcus
Gareth Bennett wrote:
Hi Marcus,
These come in all shapes and sizes, D band cavities are particularly
hard to obtain at the best of times. Quite often cavities are not
needed, especially if the Duplexer is a bandpass item. these are
usually added on a "per site" basis.
It's good housekeeping to have a bandpass filter system, generally as
the Tait duplexers are notch devices only.
Cheers
Gareth Bennett
(----- Original Message -----
*From:* Marcus <mailto:[email protected]>
*To:* [email protected]
<mailto:[email protected]>
*Sent:* Monday, October 26, 2009 11:26 PM
*Subject:* Re: [Repeater-Builder] Tait UHF Standby Repeater D-Band
i have added your email addy to my address book in case i need any
more duplexors
what i need is a price first for a cavity filter or two
not a duplexor, nor a diplexor, nor a arieal, nor anything else
am just after a price and availibility of Cavity filters
Marcus
Gareth Bennett wrote:
Hi Marcus,
How many do you require, and what model Tait?
I have either T300 or T800 Series rackmount duplexers available
Cheers
Gareth Bennett
(----- Original Message -----
*From:* Marcus <mailto:[email protected]>
*To:* [email protected]
<mailto:[email protected]>
*Sent:* Monday, October 26, 2009 1:30 PM
*Subject:* [Repeater-Builder] Tait UHF Standby Repeater D-Band
is there anyone on this list that resides in NZ and if so/not
does
anyone have any Cavity filters, if so how much
i have a Tait Repeater running D-BAND it was a backup system
would like to get it running, forgive the contradiction, the
system is
fully operational, i would like to put it to some use
must be loads of points i have not mentioned, so if need be
fire away, i
shall answer all my old almost had it brain can conjur up
Marcus
