When I worked for the County Police in Ky back in the 70s I had an RCA 1000 four channel crystalled up for 2 meter ham. 100 watts worked great from the county vehicle. No mods were necessary. David
Feb 2, 2010 03:37:20 AM, [email protected] wrote: I'm not surprised at all by this story although it is quite entertaining to say the least! These are some tough radios to tune up. I use a spectrum analyzer along with my service monitor to assist in tune up. I've already run into the issue of getting the multiplier stages tuned correctly in the radio and, being a 30 - 36 MHz radio; the mult's simply don't want to operate at 29.50 MHz. Nor does the PA stage. 73's de KC5DBH Matt From: Wayne To: [email protected] Sent: Sun, January 31, 2010 6:52:34 AM Subject: [Repeater-Builder] Re: RCA service manuals, series 700 and series 1000, 25 - 50 MHz, 150 MHz. --- In [email protected], Matt Harker wrote: > > Hi everybody, > > I am looking for any old RCA service manuals for the Series 700 and Series > 1000 radios whose operating range was as follows: > > 25 - 30 MHz > 30 - 36 MHz > 36 - 42 MHz > 42 - 50 MHz Hello Matt Be careful how you tune up the PA in the 700. Here is a fumy story on myself. I tuned up a 700 for 52.525 MHz and the radio put out the rated power with my Bird into a good dummy load. When I connected it to my side tower mounted ground plane, cut for 6 meters, the SWR was terrible. I spent a couple of days checking the antenna and feed line and every thing seemed to be OK. I even made several contacts on 6 meters and every one said the radio sounded good. Later I checked the 700 with a spectrum analyzer and found half the power was going out around 42 MHz! Properly retuning the PA fixed the high SWR and may have saved me an audience with the FCC Wayne, WA5LUY. ------------------------------------ Yahoo! Groups Links
