< LMR and similar cables are not rated for low PIM > Kindly let me Know what exactly PIM means 73s rffun
----- Original Message ----- From: Larry Horlick To: [email protected] Sent: Monday, March 01, 2010 4:02 AM Subject: Re: [Repeater-Builder] LMR Cable Indeed. I'll read the archives. Thanks. 73 On Sun, Feb 28, 2010 at 8:59 PM, Chuck Kelsey <[email protected]> wrote: The subject comes up on this list about every other week. I can only assume you are new. LMR and similar cables are not rated for low PIM, a fact verified by the manufacturer. Chuck WB2EDV ----- Original Message ----- From: Larry Horlick To: [email protected] Sent: Sunday, February 28, 2010 8:49 PM Subject: Re: [Repeater-Builder] Micor Stock Power Supplies I've never heard of it. As an installer, I'm always under pressure to use less expensive feedlines than the venerable Heliax, and I had often considered LMR, but never actually succumbed to the temptation. This is interesting information. Is this a well documented phenomenon? Anyone else like to chime in on this... Larry
