How much current is it pulling? At 53.7 I suspect you are well into the roll off on the output low pass filter. I forget exactly how it's implemented in this case.
On 3/18/2010 9:06 AM, tahrens301 wrote: > > > Hi all, > > Working on a micor mobile to be used as a > repeater (only using the exciter/control board/PA). > > Was going through it, and am only able to get > about 75 watts out of it with the exciter on 53.7. > > The exciter is putting out 0.3 watts... a bit more > than most exciters I've seen, but they were high band. > > The tags on the PA cover indicate over 100 watts > were once measured. > > Made most of the capacitor mods to the exciter, but > it tunes up easy. (slugs not in wierd places). > > Oh, not gonna run it at full power, but wanted to > make sure it was up to snuff. > > Thanks, > > Tim W5FN > > -- mailto:[email protected] Oz POB 93167 Southlake, TX 76092 (Near DFW Airport)
