BTW, here's a link to a web site done by a DC comm's lawyer. Yes, he has 
the 'disclaimers' not to use it as 'legal advice', but you can beturbut 
it's right.
<http://www.narrowbandinglaw.com/faqs.html>
It's the second last question.
There is a link in the answer to the FCC order involved, but of course 
it's filled with typical legal-ese...

One thing I am not sure about-I do remember now that there was a 
narrowband only version of the TK-x20 mobiles, along with a few other 
Kenwoods of that vintage-the model number had an 'N' on the end. I don't 
remember a TKR version, but there may have been. Those should of course 
be fine, because they started life NB.

Also rx's are not an issue. Narrowbanding, say, an MII rx is fine, since 
the FCC doesn't care about rx's. It's only tx's that need to be properly 
type accepted.

Jim Barbour
Transcore

On 3/20/2010 12:21 AM, wb6dgn wrote:
>
>
>> Except for one thing-the x20 series radios weren't type accepted
>> for narrowband, and the FCC has already said that if that's the
>> case, it won't fly.
>
> The "last time around", when a manufacturer wished to provide a
> "narrow banding kit" for a previously type accepted radio, they
> applied to the FCC for a "supplemental type certificate" (STC)
> covering the modification kit installed in the subject equipment.
> This STC number was attached to the radio ID plate in addition to or
> in place of the original type acceptance number.  This kit was then
> dealer or service shop installed in accordance with the
> manufacturer's instructions.  This then provided an updated type
> acceptance ID for that subject radio model series with the kit
> installed.  It was not up to the user, nor the user's local radio
> shop to apply for this.  This program and the rather extensive
> engineering data required was originated and and undertaken by the
> original equipment manufacturer BUT installed by a local radio repair
> facility.  While receiver modifications were not required nor covered
> by the STC, they were also supplied in every case that I am aware of,
> as part of the "narrow banding kit".


Reply via email to